Small Molecule Dispersion Technology (SMT)
CAB-O-JET® dispersion | Color/Pigment | pH/Solids % | Regulatory Status | |
'New' Optimized High Performing KCMY Portfolio | Black/PK 7 | 7/15% | Swiss Printing Inks Ordinance | |
Cyan/PB 15:4 | 7/23% | Swiss Printing Inks Ordinance | ||
Yellow/PY74 | 7/23% | Swiss Printing Inks Ordinance | ||
Magenta | Swiss Printing Inks Ordinance | |||
Legacy Black Portfolio | Black/PK 7 | 7.5/20% | ||
Black/PK 7 | 7.5/15% | |||
Black/PK 7 | 9.5/15% | |||
Black/PK 7 | 9/15% | |||
Other Color Options Portfolio | Magenta/PV19 | 9/15% | ||
Yellow/PY155 | 9/10% |
The data in the table above are typical test values intended as guidance only and are not product specifications. Product specifications are available upon request from your Cabot representative.
For further assistance please contact
America – Elissa Meschino…elissa.meschino@cabotcorp.com
Europe – Veronique Loysch…Veronique.Loysch@cabotcorp.com
China + Rest of Asia – Tony Yu….Tony.Yu@cabotcorp.com
Japan – Satoru Yamada…..Satoru.Yamada@cabotcorp.com
For any other region please contact Elissa Meschino at email above
Disclaimer
All materials contain biocide
Storage Conditions;
- CAB-O-JET® dispersions should be stored at room temperature to prevent any change in physical properties; a storage temperature of 20-25°C is recommended. Though dispersions are stable up to 60°C, storage in temperatures exceeding this temperature may be detrimental to dispersion stability. Most CAB-O-JET® dispersions are also freeze/thaw stable; however, freezing may impact some quality parameters such as viscosity or particle size distribution. To maintain the highest level of product quality, dispersions should be protected from freezing during storage and shipment. During cold-weather months (October 1st thru April 1st in the northern hemisphere), dispersion products should be shipped “Protect-From-Freeze” in temperature-controlled trucks with a minimum temperature of 45°F/8°C. It is also recommended that freeze indicators be employed during this period to validate temperature conditions during shipment. In the event that a dispersion product is subjected to freezing temperatures and appears to have frozen, please contact your regional Technical Service Representative. All sales are subject to the Terms and Conditions available on this site.
All sales are subject to the Terms and Conditions available on this site and those available at https://www.cabotcorp.com/information/terms-of-sale, including, but not limited, to the following:
a.
b.
c.
Limited Warranty. (i) Seller warrants that all Products to be supplied by Seller to Buyer shall, at the time an order is released for shipment, meet Seller’s standard product specifications for such Product then in effect, or such other specifications that have been expressly made a part of an Agreement. Seller also warrants title to the Products free and clear of all liens, restrictions, reservations, security interests or other encumbrances, except for any security interest in favor of an unpaid seller of goods arising under applicable law. Claims in respect of any Products at any time sold or agreed to be sold by Seller, whether in contract, tort or otherwise (including negligence or misrepresentation), including claims on account of weight, quality, loss or damage to said Products, are waived by Buyer unless made in writing within 30 days after arrival thereof at destination. In case of a timely claim concerning quality, Buyer shall promptly furnish to Seller appropriate samples of nonconforming Product for testing and analysis. (ii) Seller makes no warranty, either express or implied, as to the accuracy or completeness of, or the results to be obtained from, any technical advice furnished or recommendations made by Seller or a representative of Seller concerning any use or application of the Products. Buyer assumes full responsibility for quality control, testing and determination of suitability of a Product for Buyer’s intended application or use. The warranties set forth in this paragraph extend only to the Buyer.
Disclaimer of Other Warranties Representations and Conditions. THE LIMITED WARRANTY ABOVE SETS FORTH THE SOLE WARRANTY OF SELLER WITH RESPECT TO ANY PRODUCTS AT ANY TIME SOLD TO BUYER OR ANY TECHNICAL ADVICE FURNISHED OR RECOMMENDATIONS MADE BY SELLER. ALL OTHER WARRANTIES AND REPRESENTATIONS AND CONDITIONS OF ANY KIND, WHETHER EXPRESS OR IMPLIED, AND WHETHER ARISING UNDER STATUTE OR UNDER CONVENTION, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. THIS SHALL APPLY WHETHER THE PRODUCTS ARE USED ALONE OR IN COMBINATION WITH OTHER SUBSTANCES OR MATERIALS, EVEN IF THE PURPOSES OR USES OF THE PRODUCTS BY BUYER ARE KNOWN BY SELLER OR IF SELLER HAS BEEN INVOLVED IN THE ANALYSIS OF THE PURPOSES OR USES OF THE PRODUCTS OR HAS PROVIDED ANY RECOMMENDATIONS, ASSISTANCE OR INSTRUCTIONS IN CONNECTION THEREWITH. BUYER ACCEPTS AND ASSUMES ALL RESPONSIBILITY, RISK AND LIABILITY FOR, AND AGREES TO DEFEND, INDEMNIFY AND HOLD SELLER HARMLESS FROM AND AGAINST, ANY CLAIMS OR LIABILITIES RELATING EITHER TO BUYER’S USE OF THE PRODUCTS OR ANY GOODS MANUFACTURED BY BUYER CONTAINING ANY OF THE PRODUCTS.
Limitation of Remedies Seller’s liability, and Buyer’s sole remedy, for any claim in respect of any Products (expressly including Seller’s breach of any warranty obligation set forth in Paragraph (a) above), at any time sold or agreed to be sold by Seller, is limited to, at Seller’s option (i) replacement of the particular quantity of nonconforming Product or (ii) refund of the purchase price of the particular quantity of nonconforming Product, less the value, if any, to Buyer of the nonconforming Product. No claim or recovery by Buyer of any kind (whether as to Product delivered or for non-delivery of Product) shall be greater than the purchase price of the Product to which the claim relates. TO THE MAXIMUM EXTENT PERMITTED UNDER LAW, IN NO EVENT SHALL SELLER BE RESPONSIBLE OR LIABLE TO BUYER OR ANY THIRD PARTY UNDER ANY THEORY OF LAW FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO ANY LOSS OF PROFITS, LOSS OF GOODWILL, BUSINESS INTERRUPTION, LOSS OF REVENUE, MISSED SAVINGS OR OTHER ECONOMIC LOSS) EVEN IF ADVISED OF THE POSSIBILITY THEREOF.